Whirlpool RBD277PDB4 Use And Care Manual page 25

3. Set temperature (optional).
Do this step if you want to set a tem-
perature other than 350°F. Press • to
raise the temperature or • to lower the
temperature in 5°F amounts. Use these
pads until the desired temperature
shows on the small display. (If the Temp
pads are held down the temperature will
change faster.)
PRESS YOU SEE
4. Press Cook Time pad.
PRESS
(example shows Bake at 375°F
[or 191°C])
YOU SEE
5. Set cook time
Press the "up" (•) or "down" (V) pad(s)
until the correct time shows on the
display.
PRESS YOU SEE
6. Start oven.
NOTES:
oYou can change the temperature or
time settings any time after pressing
the Start/Enter pad by repeating Steps
2 through 5.
• The display will show "door" and the
heating elements will not heat if the
door is open when you try to bake/roast.
oWhen you press the Start/Enter pad,
the display will count down the baking/
roasting time in hours and minutes (if
cook time is more than 1 hour) or in
minutes and seconds (if cook time is
less than 1 hour).
PRESS
(example shows 30-minute
baking/roasting time)
YOU SEE
7. When cooking is done:
The oven will turn off automatically and
beep four times. You will also hear four
1-second tones every minute (unless
they have been disabled [page 11]) until
you press the Off/Cancel pad.
(display counts down cook time)
YOU SEE
continued on next page 25