Microwave Oven Control; Display; Start; Cancel Off - Whirlpool YMH2175XSS0 Use & Care Manual

MICROWAVE O VENCONTROL
SENSOR QUICK TOUCH
ADD POPCORN BAKED FRESHVEG FROZEN
30 SEC POTATO VE6
FROZEN ENTREE BEVERAGE
G
COOK
TIME
©
COOK
POWER
©
WARM
HOLD
g
@ ©
CLOCK TIMER
Set/Off
©
REHEAT
©
COOK
©
DEFROST
s_AR7
Hold 3 Sec
OFF
VENTFAN LIGHT TURNTABLE
Hi'Med.Lo.Off Hi.Lo.Off On'Off
The speed of the scrolling text may be adjusted, if necessary.
To Adjust Scroll Speed:
1. Touch and hold CLOCK for 3 seconds until 2 tones sound.
2. Touch number pad "1" for SLOW, "2" for NORMAL or "3" for
FAST.
3. Touch START to complete the adjustment.
The display language may be changed.
To Change Language:
1. Touch and hold number pad "0" for 3 seconds until 2 tones
sound.
2. Touch number pad "1" for ENGLISH or "2" for FRENCH.
3. Touch START to set the language.
The START pad begins any function. If it is not touched within
5 seconds after touching a pad, "PRESS START" will scroll in the
display as a reminder. If START pad is not touched within
2 minutes after touching a pad, the display will return to the time
of day mode and the programmed function will be canceled.
If cooking is interrupted by opening the door, touching START will
resume the preset cycle.
The CANCEL OFF pad stops most functions except for the
Control Lock and Demo Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the cycle.
The ADD 30 SEC control automatically starts the microwave oven
at 100% power for 30 seconds, and adds 30 seconds of cook
time, up to 10 minutes, with each additional touch of the control.
Touching ADD 30 SEC during a manual cook cycle will add
30 seconds of cook time at the current cook power.
This is a standard 12-hour clock (12:00-11:59) and does not
show a.m. or p.m.
When power is first supplied to the microwave oven, a ":" will
blink in the display. Touch CANCEL OFF to stop the blinking.
If the ":" blinks in the display at any other time, a power failure
has occurred. Touch CANCEL OFF and reset the clock if needed.
If an invalid value has been entered, the invalid entry tones will
sound, and the input prompt will reappear in the display. Retry
your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use (standby mode), the display shows the time of
day or Timer countdown.
To Set:
The microwave oven and timer must be off.
1. Touch CLOCK.
2. Touch the number pads to set the time of day.
3. Touch CLOCK or START.
To Remove:
1. Touch CLOCK.
2. Touch 0.
3. Touch CLOCK.
The time will disappear, and ":" will appear on the display.