USING THE FLASH HOUSING:
OPENING THE HOUSING:
Carefully release the 4 safety latches and open the back door of the housing.
INSERTING THE FLASH:
Since the Fantasea 800 Flash Housing was specifically designed for the Nikon SB 800
Speedlight, insertion is a simple matter of placing the flash into the housing. Make sure the flash
is properly aligned and that it sits perfectly flat. There are no screws or mounts to worry about or
any other alignments once the flash is properly inserted.
Notes:
Hot Shoe Insert
1. It is recommended first to attach the flash to the camera's
hot shoe to determine if it is functioning properly.
2. Once this is determined, insert both into their respective
housings.
Hot Shoe Lock [turn to right]
5