Whirlpool GMC275PDB2 Use And Care Manual page 14

'!!ii!i if! !!!iilii!!!!i!!i !!!i
4. Start oven, by touching START/ENTER.
YOU SEE
For best results, some recipes call for one cook power
for a certain length of time, and another cook power
for another length of time. Your oven can be set to
change from one to another automatically.
1. Put food in oven and close door.
NOTES:
• If you want to add more time during or after
cooking, use ADD MINUTE or COOK A BIT
MORE.
• To reset the cooking time after setting the cook
power, you must type in four digits. For example,
to change 25 seconds to 35 seconds, touch
number pads 0, 0, 3, and 5. Or to change 1
minute 25 seconds to 1 minute 35 seconds,
touch Number pads 0, 1, 3, and 5.
• To change cooking time after cooking has
started, first open and close the oven door. Then,
enter the desired cooking time as described
above, and touch START.
When cooking time ends:
Four tones will sound.
YOU SEE
2. Set cooking time for first stage.
Example for 7 minutes, 30 seconds:
Touch "7, 3, 0".
YOU SEE
3. Set cook power for first stage
(optional).
If you want to cook at full (100%) cook power, go to
Step 4.
Example for 50% cook power:
Touch COOK POWER six times.
YOU SEE
5. After cooking, open the door.
OR
Touch OFF/CANCEL.
Four tones will repeat every minute until you open
the oven door or touch OFF/CANCEL. This will
clear the display.
To change cook power after cooking
has started:
Touch COOK POWER until the cook power you want
is displayed or touch the correct Number pad.
NOTE: You can change the cook power when using
MICRO TIME orADD MINUTE.
4. Set second stage.
When the display says "TIME," touch MICRO TIME
to set the second stage.
YOU SEE
5. Set cooking time for second stage.
Example for 3 minutes, 25 seconds:
Touch "3, 2, 5".
YOU SEE
14