Using The Automatic Settings; End-Of-Cycle Signal; Fluffair - Whirlpool LG5801XK0 Use & Care Manual

Using the
Automatic Settings
With AUTOMATrC REGULAR and
AUTOMATIC PERMANENT PRESS, you
select how dry you want the load to be.
When the load is as dry as the setting
you have selected, the Cycle Control
wil! advance toward ending the cycle,
Use the AUTOMATIC REGULAR
Cycle to dry most family Poads, During
the last five minutes of the drying cycle,
the load is tumbred without heat. This
helps make the load easier to handle,
Use the AUTOMATIC PERMANENT
PRESS Cycle to dry permanent press,
knits and other synthetic fabrics The last
10 minutes of the drying cycle are wi_h
out heat This cool-down time helps
keep wrinkles from setting in.
For the first few roads, set the
Cycle Control Knob to point in the mid
die between VERY DRY and LESS DRY,
FLUFF AIR should be used for such
items as plastic shower curtains or
tablecloths, rubber-backed rugs, some
pi!!ows, stuffed toys, etc.
• Turn the TEMPERATURE SELECTOR to
FLUFF AIR.
• Turn the Cycle Control Knob to the
number of minutes you want in the
TrMED DRYING Cycle
TUMBLEPRESS
Control
This setting is useful for removing
wrinkles from packing in suitcases or
ctosets TUMBLE PRESSwill help put them
back into their pre-set shape
• Set Cycle Control Knob to TUMBLE
PRESS,
When the dryer stops, feel the
items in the load If they are about how
you like them, keep using this setting
If the items are drier than you like,
use a setting nearer LESS DRY or COOL
DOWN the next tJme you dry a load !ike
that.
If the items are not as dry as you
want, use a setting nearer VERY DRY the
next time you dry a load like that,
After drying a few loads, you will
find a favorite setting to use,
FLUFFAIR
This temperature setting is useful
for fluffing bedding, pillows and cloth-
ing, or dusting drapes. It is also best
to use when damp-drying heat-sensitive
items.
6
• Set TEMPERATURESELECTOR fo
PERM'T PRESSMED or HEAVY HIGH
• Push the Start Button
For best results, TUMBLE PRESS
only a few items at a time; put them on
hangers or fold them as soon as the
dryer stops,
End-of-Cycle
Signal
A signal will let you know that
the dryer has stopped
The spgnal is helpful when you are
drying permanent press, synthetics
and other items lhat reallyshould be
taken out as soon as the dryer stops
The signal can't be turned off and
_t is not adjustable