Advertisement
ADJUSTMENT
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 13 for impor-
tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for several exercises.
Make sure all parts are properly tightened each time you use the weight bench. Replace any worn parts immedi-
ately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use
solvents.
USING THE CURL PAD
To use the Curl Pad (20), insert the Curl Post (6)
into the Front Leg (4), and tighten the Curl Post
Knob (24) into the Front Leg and into one of the
adjustment holes in the Curl Post. Make sure that
the Curl Post Knob is inserted into one of the
adjustment
holes.
When performing exercises that do not require the
Curl Pad (20), remove the Curl Post Knob (24) and
the Curl Post (6).
ADJUSTING
THE BACKREST
To change the angle of the Backrest (19), lift the
Backrest and insert the Backrest Brace (15) into a
different slot in the Frame (1).
19
1
Slot
USING THE LEG LEVER
To use the Leg Lever (5), slide a weight plate (not
included) onto the weight tube on the Leg Lever.
Then, secure the weight plate with the Weight Clip
(8).
Weight
11
Advertisement
