Configure Lldp Ports Vendor-Specific Dot1 Port-Protocol-Vlan-Id - Extreme Networks ExtremeWare Command Reference Manual

configure lldp ports vendor-specific dot1
port-protocol-vlan-ID
configure lldp ports
vendor-specific dot1 port-protocol-vlan-ID [<cr> | vlan [all | <vlan
name>]]
Description
Configures LLDP ports to advertise or not advertise port VLAN information to its neighbors. Since this
is a vendor specific option, there may not be support for this from the neighbor.
Syntax Description
all
portlist
advertise
no-advertise
all
vlan name
Default
The default is not to advertise.
Usage Guidelines
N/A.
Example
The following command configures all ports to advertise port VLAN information to neighbors.
configure lldp ports all advertise vendor-specific dot1 port-protocol-vlan-id
The following command configures port 1:5 to advertise information about VLAN
neighbors.
configure lldp ports 1:5 advertise vendor-specific dot1 port-protocol-vlan-id vlan
vlannew
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is available on all Extreme switches.
ExtremeWare 7.7 Command Reference Guide
[all | <portlist>] [advertise | no-advertise]
Applies to all ports on the switch.
Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
Specifies that information is to be sent to neighbors.
Specifies that information is not to be sent to neighbors.
Applies to all VLANs.
Applies to the specified VLANs.

configure lldp ports vendor-specific dot1 port-protocol-vlan-ID

vlannew
to
2417