Extreme Networks Summit WM3000 Series Reference Manual page 72

Controller Information
1 Select an image from the table in the Firmware screen.
2 Click the Update Firmware button.
3 Use the From drop-down menu to specify the location from which the file is sent.
4 Enter the name of the file containing the firmware update in the File text field.
This is the file that will append the file currently in use.
5 From the Using drop down menu, select either FTP or TFTP as a medium to update the firmware.
a Use FTP to get the firmware update from a File Transfer Protocol (FTP) server. A user account must
be established on the FTP server specified for the firmware update.
b Use TFTP to get the firmware update from a Trivial File Transfer Protocol (TFTP) server.
NOTE
On the Summit WM3700, users can also transfer firmware files using USB or Compact Flash. On the Summit
WM3600, users can transfer firmware files using USB.
6 Enter the IP address for the FTP or TFTP server in the IP address field.
7 Enter the username for FTP server login in the User ID field.
8 Enter the password for FTP server login in the Password field.
9 Enter the complete file path for the file that contains the firmware update in the Path field.
10 Click the Do Update button to initiate the update.
A warning prompt displays. Upon confirming the firmware update, the controller reboots and
completes the firmware update.
CAUTION
When restarting or rebooting the controller, the Radius server is restarted regardless of its state before the reboot.
11 Click OK to add the changes to the running configuration and close the dialog.
12 Refer to the Status field for the current state of the requests made from the applet. Requests are any
"SET/GET" operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the controller.
13 Click Cancel to close the dialog without committing updates to the running configuration.
72
Summit WM3000 Series Controller System Reference Guide