Table of Contents
Advertisement
•
If not, the BD player will automatically revert to Dolby Digital 5.1 on the HDMI output (if supported
by the HDMI-connected audio receiver).
•
If the HDMI device connected to the BD player does not support any Dolby codec (TrueHD, DD+,
or DD), the BD player will automatically revert to PCM on the HDMI output.
-
The number of PCM channels will match the number of audio channels in the original
codec (7.1 channels for DTS-HD and for DTS), IF supported by the HDMI receiver or TV.
-
Otherwise, the number of HDMI channels will match the capabilities of the HDMI
receiver (or TV) connected to the BD player.
2. Or 48 khz, if the "PCM Downsampling" menu setting is set to 48 khz.
3. Assumes all eight speakers are configured as either "small" or "large" in the speaker setup menu
4. Up to 7.1 channels are possible with TrueHD and DD+ soundtracks.
If fewer channels are placed on
these tracks, fewer channels will be output.
5. When "Bitstream HD" has been selected., 7.1 channels are only possible on the analog outputs ffthe
HDMI output is also connected to an HDMI surround receiver capable of decoding a 7.1 channel DD+
soundtrack
-
To guarantee that 7.1-channels are always available on the analog outputs, always
select one of the PCM options from the setup menu.
6. DD+ is only possible in this case if a DD+ capable HDMI audio receiver (see note 1) is connected to
the HDMI output of the BD player, and an HDMI TV capable of 720p or higher resolution is also
connected.
7. Tru-HD is only possible in this case if a Tru-HD capable HDMI audio receiver (see note 1) is
connected to the HDMI output of the BD player, and an HDMI TV capable of 720p or higher resolution
is also connected.
C.2
DTS and DTS-HD Audio
Tracks
If you select one of the DTS audio formats on the main disk menu, the BD player's outputs will be as
shown in the table below:
Selected
BD/DVD
Audio
Track
DTS
5.1
Channel
48/96 Khz
Digital Output
Setup Menu is
set to:
Bitstream HD
Bitstream Legacy
Bitstream Mixed
PCM 7.1
PCM 5.1
PCM Stereo
DTS 5.1
DTS 5.1
DTS 5.1
PCM
(5.10h@
48kHz)
PCM (5.10h@ 48kHz)
PCM
(2oh@ 48kHz)
DTS 5.1
DTS 5.1
DTS 5.1
PCM
(2oh@ 48kHz)
PCM
(2oh@ 48kHz)
PCM
(2oh@ 48kHz)
5.1
Stereo
channels
(48Khz
(48Khz
DAC)
DAC)
C-2
Advertisement
Table of Contents
