VIORE BDP1000 Manual page 36

Note: Press the 'LEFT' navigation key to exit the current level of the pop-up menu. Pressing 'LEFT' on
the first level pop-up will exit from the pop-up view completely.
6.7.2 Viewing the Image Properties
Navigate through the disk contents using the 'RIGHT', 'LEFT', 'UP' and 'DOWN' navigation keys to the
desired image file.
Option 1
Press the 'MENU' key to invoke the pop-up menu for the image file. Select the 'Properties' option in the
menu as shown in below figure. This will display the properties of the selected image file, such as camera
model, resolution, etc (if this information is present in the JPEG file).
Note: Press the 'LEFT' navigation key to exit the current level of the pop-up menu. Pressing 'LEFT' on
the first level pop-up will exit from the pop-up view completely.
Option2
The image properties can also be viewed while displaying the image.
Press the 'MENU' key to invoke the pop-up menu for the image file in image display mode. Select the
'Properties' option in the menu as shown in below figure. This will display the properties of the selected
image file like camera model, resolution etc if information is present.
Note: Press the 'LEFT' navigation key to exit the current level of the pop-up menu. Pressing 'LEFT' on
the first level pop-up will exit from the pop-up view completely.
6.7.3 Rotating, Panning, and Scaling the Image
Rotating the Image
The image files can be rotated only while viewing the image.
Rotating the Image Clockwise
Press the 'MENU' key to invoke the pop-up menu. Select the 'Rotate' option in the menu as shown in the
figure below, and press the 'RIGHT' navigation key. This will invoke a sub pop-up. Select the 'Right'
option from the sub pop-up and press 'OK'. This will rotate the image in the clockwise direction by 90
degrees.
Follow the steps above to rotate the image by 180,270, or 360 degrees.
30