Teradici APEX 2800 Quick Start Manual page 2

Teradici APEX™ 2800 Server Offload Card Quick Start Guide
®
3. Connect to the ESXi server using a SSH client (e.g. PuTTy) from your PC
and install the driver package:
a. Navigate to the /tmp folder.
b. Enter the following command:
• ESXi 4.1
esxupdate --bundle apex2800-version-esxi-version-xxxxxx.zip
update
The following message appears when the installation completes:
• ESXi 5.0
esxcli software vib install -d /tmp/apex2800-version-esxi-version-
xxxxxx.zip
The following message appears when the installation completes:
4. Reboot the ESXi server.
5. In vSphere client, right click on the ESXi server in the inventory and select
Exit Maintenance Mode.
© 2004-2012 Teradici Corporation. All rights reserved.
Teradici, PCoIP, PC-over-IP, and APEX are trademarks of Teradici Corporation and may be registered in the United States and/or other countries.
All other trademarks are properties of their respective owners. Specifications are subject to change without notice.
TER1104010-5
3
Install the virtual machine driver
Install the APEX 2800 virtual machine driver on each virtual machine.
1. Power up the virtual machine.
2. Open a console window to the virtual machine from vSphere client.
3. Run the apex2800-version-xxxxxx.exe installer on the virtual machine and
follow the steps that appear.
(Note: This package must be installed from VM's Console in the vSphere
client — it cannot be installed from within a PCoIP session to the virtual
machine.)
4. After the installation completes, choose to reboot the machine later.
IMPORTANT
Make sure to power the virtual machine off and back on again. This
ensures that ESXi will inspect the updated virtual machine image.
4
Verify global policies settings
1. Verify global policies settings in View Connection Server:
• Make sure that PCoIP hardware acceleration is enabled in the Global
Policies, if any policies inherit from it.
• In any custom policies, make sure the option for enabling and disabling
PCoIP hardware acceleration is set to allow.
©2000-2012 EVGA Corp. EVGA, EVBot, the EVBot logo, the EVGA logo and combinations thereof are trademarks of EVGA Corp. All rights reserved Inc.
All brands, products and companies are trademarks or registered trademarks of their respective companies. EVGA Corp. reserves the right to change
product specifications without prior notice.
5
View the APEX 2800 status
The APEX 2800 is now installed and configured.
1. Verify the working status of the Teradici APEX 2800:
• ESXi 4.1
In your SSH session, enter the following command:
pcoip-ctrl - I
• ESXi 5.0
In your SSH session, enter the following command:
/opt/teradici/pcoip-ctrl - I
For further information, please refer to "Teradici APEX 2800 Administrator's
Guide", available at http://techsupport.teradici.com.
Need more help?
Further information is available at http://techsupport.teradici.com.
• Free self-registration
• PCoIP documentation and FAQ
• PCoIP network design checklist
• PCoIP products download
• Support ticket requests
EVGA Warranty
This EVGA product has a 3 year limited warranty from the date of purchase.
For more information please visit: www.evga.com/warranty
EVGA Corporation ▪ 2900 Saturn Street, Suite B ▪ Brea, CA 92821
EVGA Toll Free Number (888) 880-EVGA