Table of Contents
Advertisement
Using the remote control
Preparing the remote control for use
Your TV remote control can operate
your TV and most VCRs and cable TV converters,
even if they are different
brands.
If you have a Toshiba VCR or cable TV converter:
Your TV remote control is already
programmed
to operate
it. See page 12.
If you have a non-Toshiba
VCR or cable TV converter:
You must first program
your remote
control so it will operate
the other equipment.
See pages 12-14.
Installing the remote control batteries
1
Slide the battery cover off the back of the remote
control.
Press and slide to remove.
©
©
Caution:
Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.
Do not mix battery types or combine used
batteries with new ones.
Remove dead batteries immediately to prevent
battery acid from leaking into the battery
compartment.
If you do not intend to use the remote control
for a long time, remove the batteries.
2
Install two "AA" size batteries,
making
sure to match the + and -
signs on the batteries
to the signs on the battery compartment.
©
©
Note:
If your Toshiba TVremote control does not
operate all of the features of your VCR or cable
TVconverter, use the original remote control
for your other equipment.
3
Slide the battery cover back onto the remote control until the lock
snaps.
lo
Advertisement
Table of Contents
