Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts - Toshiba 32A32 Owner's Manual

Adjusting the sound
Muting the sound
Press MUTE to temporarily turn offthe sound. While the sound is off,
the screen displays the word "MUTE" in the lower right corner. To
restore the sound, press MUTE or VOL • _,.
When you press MUTE, the Closed Caption feature is automatically
activated. To deactivate captions and restore normal sound, press
MUTE again. This feature works only when the Closed Caption mode
is set to OFE For more information about closed caption settings, see
"Using the closed captioned feature" on page 27.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature provides high-fldelity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information.
Note: TheMTS featureis not availablein VIDEOmode.
When the TV receives a stereo or SAP broadcast, the word "STEREO"
or "SAP" displays on-screen every time you turn the TV on, change
the channel, or press RECALL.
1"o listen to stereo sound:
1. Press MENU.
2. Press • or _, to highlight the AUDIO menu.
3. Press • or • to highlight MTS.
4. Press • or _, to highlight STR (stereo).
Note- If the stereo sound is noisy, select MONO to reduce the
noise.
AUDIO
II i.11 ti I1._I+.1"+11 _[t] IIi
_ASS 50
TREBLE 5O
BALANCE 0
S_RROUND_ [ON] OFF
MOVE[vA] SELECT [d _']
Note: In general, if you leave the TV in stereo CSTR) mode, the TV will
automaticallyoutput the type of soundbeing broadcast(stereoor mono?.
1"olisten to a second audio program (SAP}:
1. Press MENU.
2. Press • or _, to highlight the AUDIO menu.
3. Press • or • to highlight MTS.
4. Press • or _, to highlight SAP. The TV speakers will output the
second audio program (if available), instead of normal audio.
RECALL
®
®
©
@
®@
®@
@@
MUTE
-- RECALL
-- MENU
-- VOL _1I_
28