Simple One To One Connection; Chapter - EverFocus Networking Instruction Manual

Simple One to One Connection

Crossover Ethernet Cable Pin outs:
The Diagram below shows the pin configurations for a cross over cable.
Connection Procedure:
The First step is to purchase or make a cross over cable. We recommend
purchasing one if you have never made a cross over cable. Please
remember you can not use a straight through network cable for this
application
Once you have a cross over cable plug one end into the LAN port on the
back of the recorder and the other into the network card on the back of
the computer.
Now Log into the Everfocus DVR menu and using the jog dial from the
previous chapter go to the Network Setting Menu. (See page 28 for more
instructions)
Cat 5
Cross-over-cable
Diagram 31
5