EverFocus EDR1640 Instruction Manual page 98

Diagram 10.1
Connection Procedure:
The First step is to purchase or make a cross over cable. We recommend purchasing one
if you have never made a cross over cable. Please remember you can not use a straight
through network cable for this application
Once you have a cross over cable plug one end into the LAN port on the back of the
recorder and the other into the network card on the back of the computer.
Now Log into the Everfocus DVR menu and using the jog dial from the previous chapter
go to the Network Setting Menu.
Assign an IP address of 192.168.001.003 to the DVR, a Subnet mask of
255.255.255.000, and a default gateway of 192.168.001.001.
The next step is to get the computer onto the same network to do this you will need
administrator access to your windows machine.
To assign a static IP address in Windows 2000/XP.
88