Advertisement
5. I ns t al l at i o n
1. Installation of Flush Mount
① Installation of the camera with SURFACE
CASE(using M4x40)
② Installation of the camera with SCREWS
③ Installation of the camera with JUNCTION BOX
2. Installation of Surface Mount
NO TE
Check the safe wire which
should be entirely inserted into camera
housing during locking the dome cover to
maintain Waterproof condition.
PIPE
① Installation of the camera on the wall
② Installation of the camera on the 3/4" NPT PIPE
③ Installation of the camera on the JUNCTION BOX
When using the camera
without LED take off the rubber.
1 0
Advertisement
