Video Menu; Mode - Sony KP-53XBR200 Operating Instructions Manual

Using the VIDEO Menu
VIDEO
MODE : VIVID
PICTURE _ 1
BRIGHTNESS _
COLOR _
Sliders
HUE
SHARPNESS
TRINITONE : HIGH
DRCMODE: HIGH
DYNAMICpICTURE: OFF
Move .=. Selecte, Exil
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 34.
To select the VIDEO W menu:
Display =_ Highlight _] _ Select
t
To restore the factory settings
Press RESET on the remote control while the
VIDEO menu is selected. To restore each
MODE to the factory setting, press RESET
after selecting the mode to be reset.
Tip "_"
press PICTURE MODE on the remote control for direct
selection of a MODE setting.
MODE
Customized picture
viewing
PICTURE
Picture Adjustment
BRIGHTNESS
Picture Adjustment
You can choose one of five different video modes that best suits the program you
are watching. You can also adjust the picture items for each mode to suit your
taste. When adjusting them, first select each MODE individually.
VIVID: Select for enhanced picture contrast and sharpness.
STANDARD: Select to display a standard picture for normal viewing environments.
MOVIE: Select to display a finely detailed picture for low light environments.
GAME: Select to display graphics such as a video game.
PRO (Professional): Select to display a picture with minimum enhancements.
Adjust slider right (up) to increase picture contrast.
Adjust slider left (down) to decrease picture contrast.
Adjust slider right (up) to brighten the picture.
Adjust slider left (down) to darken the picture.
COLOR Adjust slider right (up) to increase color intensity.
Picture Adjustment Adjust slider left (down) to decrease color intensity.
HUE Adjust slider right (up) to increase the green tones.
Picture Adjustment Adjust slider left (down) to increase the red tones.
SHARPNESS Adjust slider right (up) to sharpen the picture.
PictureAdjustment Adjust slider left (down) to soften the picture.
TRINITONE HIGH: Select to give the white colors a blueish tint.
WhiteIntensity MEDIUM: Select to give the white colors a neutral tint.
Adjustment NTSC STD: Select to give the white colors a reddish tint.
(continued
3E