Using Channel Index - Sony KP-53XBR200 Operating Instructions Manual

m Using Your New Projection TV (continued)
Using CHANNEL INDEX
You can use the CHANNEL INDEX feature
to display multiple channels for direct
selection.
Channels used for CHANNEL INDEX will
come directly from the TV's list of receivable
channels (those set during AUTO PROGRAM
or through the CHANNEL SET UP menu).
1
Press (_.
The current channel will be reduced in
size and displayed in the center of the
screen in normal motion picture format.
The first twelve receivable channels will
appear one after another, clockwise,
surrounding the center picture.
These small pictures move and pause
alternately, in intervals of one second.
(The channel number and channel caption
(if set) on the second and later
appearances will dim.)
32
2
3
A cyan frame will appear to indicate
current channel selection.
Move the joystick in any of eight dirctions
to move the cyan frame to the picture that
you wish to view, and press (_).
The selected channel will zoom in and
move to the center, and the sound of that
channel willbe heard.
If you wish to view another channel,
repeat step 2.
To view the normal picture of the selected
channel, proceed to step 4.
4
Press 0.
The center picture will be enlarged into
the whole screen for normal viewing.
Notes:
• You cannot move the cyan frame until all
of the surrounding pictures appear.
• The projection TV will continually update
each of the surrounding pictures while
the CHANNEL INDEX screen is
displayed.
• Sound will only be heard from the center
picture while the CHANNEL INDEX
screen is displayed.
• If one of the pictures received through
CHANNEL INDEX is snowy, the entire
screen may become unstable. In this case,
erase the snowy channel using
CHANNEL SKIP. (see "CHANNEL SKIP"
on page 43)
• If you leave the CHANNEL INDEX
screen displayed for an hour without any
operation, CHANNEL INDEX will be
canceled and normal picture appears.