Creating Your Own Program (Program Play) - Sony MDS-S707 Manual

CreatingYour Own Program
(ProgramPlay)
You can specify the playback order of the tracks on an
MD and create your own programs containing up to 25
tracks.
I:::>-oo •
PLAYMODE _ AMS
Press PLAY MODE repeatedly until "PROGRAM"
appears in the display when the deck is stopped.
Turn AMS until the _rack number you want
appears in the display.
3
Press AMS or PLAY MODE.
4
Repeat Step 2-3 to enter other tracks. Each time
you enter a track, the total program time is added
up and appears in the display.
5 Press 1:>40 t o start Program Play.
TO_Lq__
Press PLAY MODE repeatedly until "PROGRAM"
disappears when the deck is stopped.
"_i" You can program same
the track repeatedly
While the tracknumberappearsin thedisplay,press
A-MSas many times as you want.
"_'_ Theprogramremainseven after ProgramPlayends
When you press I>11, y ou can play the same program
again.
Notes
• The program created by the Program Play Function is lost
when you turn off the deck or disconnect the AC power
cord. The program is, however, recalled during timer
playback.
• The display shows "- -m - -s" instead of the total playing
time when the total playing time of the program exceeds
160minutes.
I
Checking the track order
You can check the order of tracks in your program
during playback or playback pause.
Turn AMS (or press MD _ or MD _1) during
playback or playback pause. The track numbers
appear in the order they were programmed.
Changing the track order
You can change the order of the tracks in your program
before you start playing.
To Dothe following:
Add tracksto the end of Do Steps2 and 3 in "Creating
theprogram YourOwn Program."
Change the whole program 1 Press • while the deck is
completely stopped.
2 DoSteps2 and 3in
"Creating Your Own
Program."
21_.