Box; With A Cable Box - Sony Trinitron KV-29RS26C Operating Instructions Manual

Connecting a VCR and TV with a
cable box
Connect the single (input) jack of the
Splitter to your incoming cable connection,
and connect the other two (output) jacks
(using coaxial cable) to IN on your cable
box and VHF/UHF on your TV.
Using a coaxial connector, connect OUT
on yo_;.r cable box to IN on your VCR.
Using AUDIO/VIDEO connectors,
connect AUDIO and VIDEO OUT on your
VCR to AUDIO and VIDEO IN on your
TV (Yellow-ViDEO, White-AUDIO Left,
Red-AUDIO Right).
.'onnecting to an S Video equipped
/CR with a cable box
for optimum picture quality)
I-2 Perform as described above.
I Using AUDIO connectors, connect AUDIO
OUT on your VCR to AUDIO IN on your TV
(White-.AUDIO Left, Red-AUDIO Right).
Using an S VIDEO connector, connect S VIDEO
on your VCR to S VIDEO on your TV.
lote:
To view scrambled channels through },our
cable box, select VIDEO 1 by pressing TVi
VIDEO on the remote control.
Disconnect all power sources before making any connections.
VCR must be connected and turned on to operate PIP I
(KV-27S26, 27V26, 29RS26, 29RS26C, 29V66M,32S26, I
32TW26, 321/26, 34RS26C, 35S26 37R526 on]/). I
Coaxial cable
VCR
H
Cable _:_- ____
Splitter Cable box
(not supplied)
(Rear of TV)
r VlBEO itT--i
.'Hr 'JHr AUO:; OUT
.... ._:,-,,_ _:_
_up,o _,'K :,_1,_: I
',/_---- VIDEO (yellow)
VMC-810S/820S (not supplied)
(Rear of TV)
1
Cable
Coaxial cable
VCR
....
Splitter
(not
supplied)
YC-15Vi30V
(not su 3plied)
__ S VIDEO
AUDIO-R (red)
AUDIO-L (white)
RK-74A (not ,supplied)
Cable box