Sony SLV-N88 Operating Instructions Manual page 15

Hookup 2 : VCR setup
Plug the VCR into the AC outlet.
The VCR automatically presets the VCR's clock and TV channels when the VCR
is plugged into the AC outlet.
7Z,iL
The VCR starts presetting the clock and
channels.
; 0/4 K0¢
When Auto preset is completed, the current
time appears in the display window.
You have now completed VCR setup.
]_ change the on-screen display language to French or Spanish, see
"Step 4 : Selecting a language" on page 17.
The clock is set using a time signal provided by some TV channels. If the clock
is incoxTect, or "-<--" appears in the display window, see "Using Manual Clock
Set" on page 21.
]_ add or disable channels manually, see "Presetting/disabling channels
manually" on page 25.
Notes
• If you connect the AC power cord belbre the antenna connections are completed, the
channeIs may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on
page 23.
• Do not press any buttons on the VCR or remote commander during Auto preset.
• Auto preset starts automalically only when you plug in the AC power cord lbr the l]rst time
after you purchase the VCR.
• Auto preset can be peribrmed by pressing • STOP continuously Ibr 5 seconds or more wifll
the VCR power turned of_i
Hookups