Sony Handycam DCR-SR67 Operating Manual page 8

- Connect the equipment into an outlet on
a circuit different ficom that to which the
receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
The nmnbers in ( ) are the supplied
quantity.
[] AC Adaptor (1)
[] Power cord (Mains lead) (1)
[] A/V connecting cable (1) []
[] USB cable (1) []
[] Rechargeable battery pack
Only lbr DCR-SR47/SR48/SR67:NP-FH30 (1)
Only lbr DCR-SR87: NP FHS0 (1)
[] CD-ROM "Handycam Application
Software" (1) (p. 25)
- "PMB" (software) including "PMB Guide"
- "Handycam Handbook" (PDF)
[] "Operating Guide" (This manual) (1)
[] []
• See page 39 lbr "Memory Stick" media you can
use with this camcorder.
Using the camcorder
• The camcorder is not dustproofed, dripproofed
or waterproofed. See "Precautions" (p. 49).
• Do not do any of the fbllowing when the
(Movie)/It_ (Photo) mode lamp (p. 15) or
the ACCESS/access lamp (p. 13, 39) are lit or
flashing. Otherwise, the recording media may
be damaged, recorded images may be lost or
other malfunctions could occur.
- ejecting "Memory Stick PRO Duo" media
- removing the battery pack or AC Adaptor
flcom the camcorder
• Do not apply shock or vibration to the
camcorder. The camcorder may not be able to
record or play movies and photos.
• Do not use the camcorder in very loud areas.
The camcorder may not be able to record or
play movies and photos.
• When connecting your camcorder to another
device with a cable, be sure to insert the
connector plug in the correct wa?c Pushing the
plug fbrcibly into the terminal will damage the
terminal and may result in a malfunction of the
canlcorder.
• To protect the internal hard disk ficom shock
by dropping, the camcorder has drop sensor
function. When a drop occurs, or under a nora
gravity condition, the block noise made when
this function is activated by the camcorder may
also be recorded. If the drop sensor catches a
drop repeatedly, recording/playback may be
stopped.
• When the temperature of the camcorder
becomes extremely high or extremely low, you
may not be able to record or play back on the
camcorder, due to the protection fbatures of the
camcorder being activated in such situations. In
this case, a message appears on the LCD screen
(p. 47).
• Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 5,000
meters (16,000 lbet). Doing so may damage the
hard disk drive of the camcorder.