Sony DVP-C660 Operating Instructions Manual page 17

After following Step 4
IWhen playing a DVD
A DVD mertuor title menu may appear on the TV
screen (see page 20).
IWhen playing a VIDEO CD
A menu may appear on the TV screen depending on the
VIDEO CD. You can play the disc interactively,
following the instructions on the menu. (PBC Playback,
see page 20.)
To turn on the player
Press O on the player. The player enters standby mode
and the power indicator lights up in red.
Then press I/(_) on the remote. The player turns on and
the power indicator lights up in green. In standby mode,
the player also turns on by pressing _ on the player or by
pressing 12>-.
To turn off the player
Press I/d) on the remote. The player enters standby mode
and the power indicator lights up in red.
To disconnect the power of the player, press q) on the
player.
Notes on playing DTS sound tracks on a CD
• Do not play DTS sound tracks without first connecting the
player to an audio component having a built-in DTS decoder.
The player outputs the DTS signal via the DIGITAL OUT
OPTICAL and COAXIAL connectors even ff "DTS" in "AUDIO
SETUP" is set to "OFF" in the setup display, and may affect
your ears or cause your speakers to be damaged.
• Set the sound to "STEREO" when you play DTS sound tracks
on a CD. (See "Changing the Sound" on page 34.) If you set
the sound to "t/L" or "2/R," no sound will come from the
DIGITAL OUT OPTICAL and COAXIAL connectors.
• If you play a CD with a DTS sound track, a loud noise may
come out from the AUDIO OUT connectors, affecting your ears
or causing the speakers to be damaged.
Notes on playing DIS sound tracks on a DVD
The signals of the DTS sound tracks are output from the
DIGITAL OUT OPTICAL and COAXIAL connectors only. No
sound will be output from the AUDIO OUT connectors.
• If the player is connected to an audio component lacking a
built-in DTS decoder, do not set "DT5" in "DIGITAL OUT" to
"ON" in the setup display. Otherwise, when you play the DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to he damaged.
• When you set "DTS" in "AUDIO SETUP" to "OFF," no sound
will come out from the DIGITAL OUT OPTICAL and
COAXIAL connectors even if you play DTS sound tracks on
DVDs.
Notes
• If you leave the player or the remote inpause or stop mode for
15 minutes, the screen saver image appears automatically It
will also appear if you play back a CD for more than 15
minutes. To make the screen saver image go away, press [2:_.
(|t you want to set the screen saver iunction to oft, see page 523
• While playing a disc, do not turn off the player by pressing O.
Doing so may cancel the settings of the menu. When you turn
off the player, press • first to stop playback and then press I/_
on the remote. After the power indicator lights up in red and
the player enters standby mode, press (D on the player.
Additional operations
DISC SELECT I<1<1/ID,,I_I
_> II •
A
i --
_®®_
_®®=
:®_=E
::3 Q QJ
E_x= c
_-am mN!
--DISC SKIP
--i
--II
DISC SKIP
To Operation
Select a disc Press DISC SELECT l - 5
on the player
Stop Press •
Pause Press |1
Resume play after pause Press II or
Go to the next disc Press DISC SKIP
Go to the next chapter, Press
track or scene in
continuous play mode
Go back to the preceding P_ss
chapter, track or scene in
continuous play mode
Stop play and rerno,Je the Press
disc
You can play discs in various modes such as Program Play
using the on-screen menu (Control Menu). For Control
Menu operations, see page 27.
17
q<
5'