Sony BRAVIA KDL-40SL140 Operating Instructions Manual page 42

No color/Dark picture/Color is [] Press P_E to select the desired picture mode (page 21 ).
not correct/The picture is too [] Adjust the Picture Mode options in the Picture meuu (page 30).
bright.
Noisy picture. [] Make sure that the antenna is connected using a 75-ohm coaxial cable (not
supplied).
[] Keep the antenna cable away from other connecting cords.
[] To avoid TV intefierence, make sure to use an undamaged antenna cable.
Biurry pi_ture?Poo__oiorl _ Tran_pohing the T_ f_0ma _oid to a warmio_ation or a _udden_hange in
room temperature may cause moisture condensation, resulting in a blurry
picture or poor color. Turn off your TV and wait a few hours before
powering on again.
No sound/Noisy sound
Good picture, no sound. [] Check the volume control.
MUnNG
[] Press © or VO/+ so that "Muting" disappears from the screen (page 22).
[] Set
Speakers to On
in the
Sound
menu (page 31 ). If it is set to
Off,
sound is not output from the TV's speakers regardless of the TV's volume
control.
[] When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL
AUDIO OUT (OPTICAL) may not provide an audio signal.
[] When tuned to a digital channel with Alternate Audio, the broadcaster
may not be broadcasting your preferred Alternate Audio language.
Audio noise. [] Make sure that the antenna is connected using a 75-ohm coaxial cable (not
supplied).
[] Keep the antenna cable away from other connecting cords.
[] To avoid TV interference, make sure to use an undamaged antenna cable.
..... PC Input ....
No Picture/No Signal. [] Confirm the PC is correctly connected to the TV in the PC IN (HD 15 cable
not supplied).
[] Ensure the output signal from the PC is one of the formats listed on
page 16.
[] Turn the PC off. Confirm the PC connection and restart the PC. Plug and
play will auto-detect the TV and correctly set up the PC timing.
[] Check the standby mode of your PC. The TV automatically will enter to
standby mode if there is no signal input.
Poor picture. [] Adjust the resolution (page 16).
[] Adjust
Phase
(page 32).
..... BRAVIA Theaire
Cannot find connected [] Make sure that the
Control for
HDMI is set up on both the TV and the
BRAVIA Theatre Sync HDMI optional device compatible with BRAVIA Theatre Sync (page 19).
device.
Cannot control second AV [] Only one A/V receiver may be used with the BRAVIA Theatre Sync and
receiver. Control for HDMI functions at one time (page 39).
Wide Mode changes [] The current Wide Mode setting is automatically replaced with the 4:3
automatically. Default setting when you change the channel or video input, if 4:3
Default
in the
Screen
menu is set to other than Off. If you want to lock in
the Wide Mode selected with _ on the remote control, set 4:3 Default
to Off in the
Screen
menu (page 32).
[] Turn off the Auto Wide option in the
Screen
menu (page 32).
42