Sony BRAVIA KDL-40SL140 Operating Instructions Manual page 16

Use the TV as a monitor for your PC by connecting an HD 15-HD 15 cable as shown below. This TV can
also be connected to a PC with a DVI or HDMI output. (Refer to the separate Quick Setup Guide.)
Rear of TV
HD15-HD15 cable
(analog RGB)
Audio cable (stereo mini plugs)
• Connect the PC IN jack to the PC using an HD 15-HD 15 cable with ferrite core (analog RGB) and audio cable
(page 13).
• The PC IN does not support 1080p format.
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
VGA ........... 640 ............................................. x.............................. 48t[!.................... 3L5 ............................................... 60 ................................ VG A ..............................................
640 x 480 37.5 75 VESA
SVGA 800 x 600 37.9 60 VESA Guidelines
..................................................... sO0 . .................................... x............. 600 ............................................ 46:9 ................................................................................................ 75 ............................................................... VESA............
XGA 1,024 x 768 48.4 60 VESA Guidelines
1.024 × 768 56.5 70 VESA
1,024 x 768 60.0 75 VESA
WXGA 1,280 x 768 47.8 60 VESA
..... 1,360 x 768 47.7 60 VESA
• This TV's PC input does not support Sync on Green or Composite Sync.
• This TV's PC VGA input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical
frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be detected
automatically. (PC reboot may be necessary.)
• 1080p format can only be supported through HDMI inputs.
16