Sony BRAVIA KDL-40XBR2 Operating Instructions Manual page 44

Using the Menus
Clock/Timers Sleep Set the time in minutes (Off, 15 minutes, 30 minutes, 45 minutes,
60 minutes, 90 minutes or 120 minutes) that you want the TV to
rem_dn on before shutting off autom_tically.
Timer 1
You can use the timers to turn the TV on, set the duration time the TV
Timer 2 will remain on, and tune to a specific channel at two scheduled times.
Timer 1 and Timer 2 will not be available until you set the Current
Time.
1 Press tl./,1!,to highlight Timer 1 or Timer 2. To set the timer,
press *.
.... go ii;cii io
instead of pressing ..
2 Press tl./,1!,to highlight one of the following options, then press
®
Program:
Select to set the timer by day, hour, minute, AM/PM,
Duration, and Channel.
Off: Select to turn off the timer. (Your previous settings are saved.)
3
If you selected
Program
in step 2, press tl. and !1.to set the
day(s), hour, minute, AM/PM, duration, and channel number.
Press @ or press * to confirm each setting and move to the
next setting.
Press _, to go back to the previous setting.
4 Press MENU to exit
Settings.
Current Time
You can set the current time.
1 Press @ to select Current Time.
Press tl. and ,1!, t o set the current time (clay, hour, minute, and
AM/PM). Press @ (or press *) to confirm each setting and
move to the next 2etting. Press _, to go back the previous setting.
Press MENU to exit
Settings.
Language
Select to display all on-screen settings in your hmguage of choice:
English, Espa_ol,
Frangais.
Menu Color Enables you to select a specific color for the on-screen settings.
Power
Saving
Select to reduce the power consumption by adjusting the backlight brightness. This also
enh_mces the black level. Select from Off, Low, High and Picture Off.
Logo
Illumination Select to illuminate the Sony logo on the t¥ont panel of the TV. Select On or Off.
Light
Sensor Select On to enable the automatic picture (screen) brightness control. The light sensor
measures the room brightness which allows the TV to automatically adjust the backlight
brightness based on the picture settings and the ambient room light conditions.
Be sure not to put anything around the sensor, asits function may be affected.
See page 30 for information about the sensor,
f,_ In low light the range of the backlight control is reduced when Light Sensor is
set to On.
44