Sony BRAVIA KDL-40XBR2 Operating Instructions Manual page 38

Using the Menus
4:3 Default Wide Zoom Select to enlarge the 4:3 picture, to fill the 16:9 screen, keeping the
Select the dqfimlt screen original image as much as possible.
mode to us'e for 4:3 Normal Select to display the 4:3 picture in its original size.
s'ources'. Full Select to eularge the 4:3 picture horizontally only, to fill the display
area.
Zoom Select to enlarge the picture horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Off Select to continue usiug the current Wide Mode settiug when the
channel or input is changed.
_ 4i3 Deiaui{ is n°t available ff Auio wide is sei io offl
!a If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for
the current channel, When you change channels (or inputs), Wide Mode is
automatically replaced with the 4:3 Default setting. To retain the current Wide
Mode setting as channels and inputs are changed, set 4:3 Default to Off.
Display Area Allows you to adjust the screen area of the displayed image.
Full Pixel Select to display the picture for 1080i or 1080p sources in its original
size.
Normal Select to display the picture in its standard size.
-1/-2 Select to enlarge the picture to hide the edge of the picture.
Horizontal Center Allows you to move the position of the picture left and right.
Press I./* and press @ to adjust.
Vertical Center Allows you to move the position of the picture tip and down. (Available only in Zoom.)
Press 4,/,!, and press @ to adjust.
Vertical Size Allows you to
adjust
the vertical size of the picture. (Available only in Wide Zoom and
Zoom.)
Press tl4'!" and press @ to adjust.
Size adjustment is especially useful for Wide Zoom picture conditions such as
news ticker information at the bottom or top of the screen.
38