Shooting Panoramic Images - Sony Cyber-shot DSC-HX1 Instruction Manual

Shooting panoramic images
Shoots multiple images and allows you to create a panoramic image fiom composed
images while you pan the camera. You can create both up and down, and right and left
panoramic images.
1 Set the mode dial to _ (Sweep
Panorama).
Hold the camera at the position
where you can see the LCD screen
clearly.
Press the MENU button for changing [Shooting
Direction] or [hnage Size] (page 58).
This part will not be taken.
Fully press the shutter button.
4
Pan the camera following the
indication on the screen.
When a guidance bar reaches to the end, the
shooting stops and panoramic images are
recorded.
Guidance bar
• If you cannot pan the camera across the entire subject within the given time, a gray area occurs in
the composed image. If' this happens, move the camera fast to record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• You cannot create panoramic images in the following situations:
You pan the camera too fast or too slow
There is too much camera shake
You pan the camera in a different direction from the setting
• Under low light conditions, panoramic images may be blurred.
38 GB