Calibrating The Appropriate Settings Automatically - Sony DAV-HDZ273 Operating Instructions Manual

Hide thumbs Also See for DAV-HDZ273:
Table of Contents

Advertisement

Calibrating the
Appropriate Settings
Automatically
[AUTO
CALIBRATION]
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate
surround sound
automatically.
• The system outputs a loud test sound when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
• Make sure that the headphones are not connected to
the unit. You cannot operate the following Steps with
the headphones connected.
1
Press FUNCTION +1- repeatedly until
"DVD" appears in the front panel
display.
2
3
4
5
6
7
Press O DISPLAY while the system is
in stop mode.
The Control Menu display appears
on the
TV screen.
Press 'I'/4, to select _
[SETUP],
then press @.
The optious tbr [SETUP1 appear.
Press t,14, to select [CUSTOM], then
press @.
The Setup Display appears.
Press 'I'/4, to select [AUDIO SETUP],
then press @.
The optious for [AUDIO SETUP1 appear.
Press t"/4, to select [AUTO
CALIBRATION],
then press @.
The options for [AUTO CALIBRATION1
appear.
Connect the calibration
mic (supplied)
to the A.CAL MIC jack on the front
panel
Set tip the calibration
triic at the ear level
using a tripod, etc. (not supplied).
The fiont of each speaker should face the
calibration
mic, and there should be no
obstructiou
betweeu the speakers aud the
calibratiou
mic.
Calibration
mic
8
Press <--/->to select [YES].
9
Press @.
[AUTO CALIBRATION1
starts.
Be quiet duriug the measuremeut.
m
• Avoid being in the measurement area and
making noise during the measurement (about 3
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
• The environment of the room in which the
system is installed may affect measurements.
• If an error message appears, lbllow the message,
then select [YES].
An error message appears when:
the headphones are connected to the unit.
the calibration mic is not connected.
front speakers are not correctly connected.
surround speakers are not correctly
connected.
0
"13
¢D
o
:3
61us

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents