Index Function
INDEX signal marks on the tape let you scan through the start of different programs
or search for a specific section of tape.
Automatic INDEX mark
An INDEX signal is automatically marked at the beginning of recording.
iNPUT
S_)T
SLEEP
JUMP
@q)®
(9@@
@@(9
TAPE
SPEED
CD
MENU
_
_8
CD
SPACE
T_ER ONSCREENCLEAR
CD
C2D
C_
_D
CD
(SnLLA_q
MARK
ERASE
•
II
RM-Y126
INDEX MARK
Manual INDEX mark
INDEX signals can be marked at any desired point during any recording or normal
playback.
Press INDEX once.
INDEX 00 appears.
INDEX O0
Then press MARK at the point where you want to mark INDEX signal. INDEX
MARK appears on the screen.
• Leave an interval of more than 2 minutes between INDEX signals when marking them one
after the other so that the VCR can detect them correctly.
• While an INDEX signal is being marked during playback,
the recorded
sound will not be
heard, but it will not be erased.
• You cannot mark an INDEX signal in the following cases:
- On a tape without safety tab.
- On an unrecorded
portion of a tape.
- Immediately before a point on the tape where the tape speed changes.
Q
S.
m.
Chapter
5 : Using Advanced
VCR Features
I 43