Using Counter/Remain; Using Counter Memory Function - Sony Trinitron KV-13VM21 Operating Instructions Manual

To display the counter, press COUNTER/REMAIN
once.
The tape counter shows the tape travel time in
hours, minutes and seconds during recording or
playback.
SP 0:00:00
To see the remaining tape time during recording or
playback,
press COUNTER/REMAIN twice.
The remaining tape time appears with "REM."
REM 1:36
For seeing the remaining tape time, first
check the tape mode.
If you want to see the remaining tape time in
T-120, press RETURN then A+ or v- until
T-120 appears in TAPE REMAIN screen.
For OTHERS, press the button until
OTHERS appears.
The counter memory makes it easy to return to a particular spot on the tape after
recording or playback. The tape stops when the counter reaches SP 0:00:00. This
feature is especially helpful when editing a recording.
Press COUNTER/REMAIN to seethe counter.
2
Start recording or playback, and press
COUNTER RESET at the point you want to
return to.
The counter displays SP 0:00.'00.
SP O:O0:O0
Press STOP • when you finish recording or playing the tape.
Press REWIND/REVIEW 4,1.
The tape stops at SP 0.'00:00.
Press PLAY • to playthe tape.
Chapter 4 : Using Basic VCR Features 35