Snapper LE3171R Safety Instructions & Operator's Manual page 4

IMPORTANT SAFETY INSTRUCTIONS
MAINTENANCE AND STORAGE
1. DO NOT store machine or fuel container inside where
fumes may reach an open flame, spark, or pilot light
as in a water heater, furnace, clothes dryer or other
gas appliance. Allow engine to cool before storing
machine in an enclosure. Store fuel container out of
reach of children in a well ventilated, unoccupied
building.
2. Keep machine and engine free of excess oil, grease
and spilled fuel to reduce fire hazard.
3. When draining fuel tank, drain fuel into an approved
container outdoors and away from open flame.
4. Inspect all bolts, nuts and screws frequently and
keep properly tightened.
5. Use only recommended shear bolts (if equipped) to
prevent possible damage to machine.
6. Service engine and make adjustments only when
engine is stopped. Remove key, remove wire from
spark plug, secure wire away from plug, and
disconnect cord from electric starting motors to
prevent accidental starting.
7. DO NOT change engine governor speed settings or
overspeed engine.
8. DO NOT test for spark by grounding the spark plug
next to spark plug hole. Spark from the plug could
ignite gas exiting engine.
9. Have machine serviced by an authorized SNAPPER
dealer at least once a year and have the dealer install
any new safety devices.
10. Maintain safety and instruction labels as necessary.
11. Use only genuine SNAPPER replacement parts to
assure that original standards are maintained.
NOTE: Specifications are correct
at time of printing and are subject
to change without notice.