Simplicity 5100251-00 Operator's Manual page 16

Collectorinstallation
%
G. Hose, 55" Long
H. Lower Hose Clamp
Figure 19. Install Deflector & Hose
Install Deflector & Hose
1. Install the deflector (A, Figure 19) and hose adapter
(D), with the tube pointing down, to the back plate
and secure with four 5/16-18 x 1" bolts (E), 5/16"
washers (C) and 5/16-18 nylon lock nuts (B).
2. Install the hose (G) onto the blower and secure with
the removable clamp (with knob) (H). At least two
bands must cover the outlet of the blower.
3. Cut the hose to fit properly between the blower and
collector. At least two bands must cover the inlet of
the adapter (D). Secure with the stationary clamp
(F)
4. Remove the valve stem covers and increase the rear
drive tire air pressure to 22 psi (151 kPa). Reinstall
the valve stem covers.
15