Blower Installation - Simplicity 5100251-00 Operator's Manual

Blower Installation
,
Install the blower onto the mower deck. Refer to
Figure 12 for the position of the quick pins in relation-
ship to the chute mount bracket on the mower deck.
The quick pins fit into the same holes that the chute
mount rod was installed.
\ 0!
48" & 52" Decks
61" Deck
Figure 12. Install Blower On Deck
2. Install the blower drive belt. Refer to Figure 13 for
the proper belt routing. It may be required to loosen
the idler pulley mounting hardware to get the belt
past the belt keeps.
IMPORTANT NOTE: The gray area denotes the flat side
of the belt. V-side of belt must contact v-groove pulleys,
flat side of belt must contact flat pulleys.
©
Figure 13. Install Belt
11