2.6. Rolling Tractor With Engine Off - Snapper LT145H38FBV Safety Instructions & Operator's Manual

Section 2 - OPERATING INSTRUCTIONS
2.6. ROLLING TRACTOR WITH ENGINE OFF
Rolling Hydro Models
1. With engine "OFF", move to rear of tractor.
2. Pull the roll release control all the way out to
disengage the hydro transmission. See Figure 2.15.
PUSH ROLL RELEASE
IN TO ENGAGE HYDRO
TRANSMISSION
ROLL RELEASE
CONTROL
FIGURE 2.15
3. Move tractor to desired location.
4. Push roll release control all the way in to engage
hydro transmission. See Figure 2.15.
5. Set park brake.
NOTE: The transmission will not propel the tractor if it is
left in the "ROLL" position.
10