Sharp LC-60LE920UN Service Manual page 20

LC-52LE920UN/LC-60LE920UN
4. Removing of MAIN Unit, POWER Unit, Woofer, Stand Angle,60" LCD Panel Module Unit.
1. Remove the 7 lock screws d) and detach the MAIN Unit _).
2. Remove
3. Remove
4. Remove
5. Remove
6. Remove
7. Remove
8. Remove
9. Remove
10. Remove
11. Remove
12. Remove
13. Remove
the 2 lock
the 2 lock
the 6 lock
the 4 lock
the 1 lock
the 2 lock
the 2 lock
the 2 lock
screws ® and detach the Terminal Cover (Bottom) ®.
screws ® and detach the Terminal Cover (Side) ®.
screws ® and detach the POWER Unit ®.
screws ® and detach the Sub Woofer @.
screw @ and detach the LCD Fixing Angle (Bottom-R) @.
screws @ and detach the LCD Fixing Angle (Top-L) @.
screws @ and detach the LCD Fixing Angle (Top-R) @.
screws @ and detach the LCD Fixing Angle (Bottom-L) @.
the 4 lock screws @ 2 lock screws @ and detach the 2 LCD Fixing Angle (B-MA) ® and 2 Fixing Angle (B-M2) _.
the 12 lock screws @ and detach the 2 Stand Angle ®.
the 3 lock screws @ and detach the BL Support Angle ©.
the 11 lock screws @ and detach the 60" LCD Panel Module Unit @.
LCD Fixing Angle
(Top-L)
_¢@ @_1_(_ LCD Fixing Angle
(Top-R)
)TERMINAL Cover
(Bottom)
LCD
Fixing Angle _\
(Bottom-L)
,_,1 :_ "-"
Stand ,_
2_ Angle (2_
60" LCD Panel
Module Unit
LCDFixingAngle '\
(B-M2) @ @ LCD Fixing Angle
LCD Fixing Angle (B-MA)
_(B-MA)
,1_i) LCD Fixing Angle
_] (Bottom-R)
4-9