Surround - Sharp AQUOS LC-52E77U Operation Manual

On=Screen Display Menu
Example
[_/ Option
INPUT LASHBAOK
@O
VOL CH
FREEZE MENU
@ @
-- FAVORITE OH --
®®@@
F_E i
°° /
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "Option".
2 Press ,&/V to select a specific adjustment item and
then press ENTER.
3 Press A/T (or 4t/1_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Skip this step for "Audio Only".
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
o The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
Select the video signal system compatible with your
equipment from the list below:
Auto/NTSC/PAL-M/PAL-N
o "Color System" can only be set for the INPUT 1 VIDEO,
INPUT 2 S-VIDEO and INPUT 3 VIDEO.
o If you have already set the Secret No., input the 4-digit
secret number here. See page 25 for setting a secret
number.
If the image does not come in clearly from the external
equipment connected to INPUT 1 or INPUT 2, you
may need to change the input signal type setting on
the "Input Select" menu.
[] iNPUT 1
Select the input signal type from the list below:
Auto/COMPONENT/ViDEO
[] iNPUT 2
Select the input signal type from the list below:
Auto/COMPONENT/S-TERMINAL
o If the selected signal type is incorrect, images are not
displayed at all or are displayed without any color.
o Refer to your external equipment operation manual for the
signal type.
o If you set INPUT 1 or 2 to Auto, the TV will automatically
select the input signal.
o Setting INPUT 1 or 2 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
iNPUT 1:
(_ COMPONENT VIDEO
(_) VIDEO
iNPUT 2:
(_ COMPONENT VIDEO
(_) S-VIDEO
To watch an HDMI or PC-IN equipment image, select
"INPUT5", "INPUT6", "INPUT7", "INPUT8" or "INPUT9"
from "INPUT SOURCE" menu using INPUT on the
remote control unit or on the TV.
Auto View:
Enable: To use View Mode based on signal
recognition,including an HDMIsignal.
Disable: No function.
Refer to your external equipment operation manual for the
signal type.
o When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
Determines whether the AUDIO terminal is used for
INPUT 4 (PC-IN) or INPUT 6 (HDMI).
Input 4 (PC}: Select this item when the audio signal is
input via the INPUT 4 (PC-IN) terminal using an analog
RGB cable.
Input 6 (HDMI}: Select this item when the audio signal is
input via the INPUT 6 (HDMI) terminal using an HDMI-
DVI conversion cable.
o When "PC Audio Select" is set to "Input 6 (HDMI)", sound
will not be produced if you use only an HDMI-certified
cable to connect HDMI-compatible equipment. To produce
sound, you should make an analog audio connection.
o If you want to connect HDMI-compatible equipment using
only an HDMI-certified cable, set "PC Audio Select" to
"Input 4 (PC)".
Q- 28