Sharp AQUOS LC-52E77U Operation Manual page 23

On=Screen Display Menu
m
Adjust mid-level brightness. The adjustment range of the
gamma can be set to a maximum of 4-2 and a minimum
of-2 by pressing 4 or _..
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
Advanced(High}/Advanced(Low}: Select a desired level
to remove jerkiness from film contents.
Standard: Detects, analyzes, converts film source.
Off: Normal viewing mode.
You can adjust the sound quality to your preference
with the following settings.
Example
[_ Audio
o "Standard" does not function when channel display shows
an input signal resolution of 480p, 720p or 1080p.
o "Film Mode" does not function when you set the "AV Mode"
to "Game".
o "Film Mode" is not available during PC format input.
Produces a clearer video image.
Off: No adjustment
Nigh/Middle/Low: Select a desired level for viewing a
clearer video image.
o "Digital Noise Reduction" is not available during PC format
input.
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
o 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
li FREEZE MENU
i o o
WW*8 '6/
1 Press MENU to display the MENU screen, and then
press 4/_ to select "Audio".
2 Press A/V to select a specific adjustment item.
o Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item.
3 Press ,&/T (or 4/_) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decreaseaudio from Decreaseaudio from
the right speaker the left speaker
o Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
• For resetting all Audio adjustment items to the factory
preset values, press A/V to select "Reset", press ENTER,
press 4/_ to select "Yes", and then press ENTER.
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of 4-16 and a minimum of-16.
Max.: -15 through +16
Min.: -16 through +15
o The range of OPC settings are active only when the OPC is
set to "On".
o The maximum setting cannot be set to a smaller number
than the minimum setting.
o The minimum setting cannot be set to a bigger number
than the maximum setting.
o Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on.
Off: Normal sound.
o You can choose Surround by pressing SURROUND on the
remote control unit. (See page 15.)
Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
o For some discs, setup may be required on your DVD player. In this
case, phase referto the operation manual of your DVD player.
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
o Audio menu is grayed out when Output Select is set to
"Variable". (See page 29.)
Q- 22