Samsung HCN5527W Owner's Instructions Manual page 58

SPECIAL FEATURES ]
Changing the PIP Channel
Quick way to access PIP C] [:
Simply press the (PIP) "CI [" button
on the remote control.
Press the CH V button to
select" Channel," then
press the VOL+ or VOL
button to change the
channel that appears in
the PtP window,
Z
Z
Z
exit.
Note: The PIP channels are not available when RE is set to ANTB.
(The PIP channels lhlk to AN%A).
Changing the Location (Rotating) in PiP mode
When you press the Locatebutton repeatedly, the PtP window
moves from corner to corner on the TV screen,
Scanning the Available Channels
This procedure scans all of the available channels and then stores
Press the Scan button, and the memorized channels will appear in
sequence for 2 to 3 seconds per channel
Press the Scan button again to stop the scanning process,
When Scan stops, the viewing mode will return to its original set_
ring.
4.1 3 ( .,,,,,, l(),ll slq(:IAI r}Alt)l]s