Samsung HCN5527W Owner's Instructions Manual page 23

INSTALLATION
]
Connecting to DVI (Digital Visual Interface)(480p, 720p, 1080i)
By inputting a high bandwidth Digital Content Protection high definition picture source
to the DVI INPUT jack on the TV_ high definition pktures can be displayed oil the
screen in their digital form. (This DVI INPUT jack is for use in the future when
High bandwidth Digital Content Protection DTV decoder, DVD players and D VHS are
put on the market.)
"iVRealPanel
1
Connect a set of audio cables betweer
the DTVSet-Top Box audio injacKs on
the TV and the AUDIO OUTjackson the
DTVSet*Too box
2
Connect a set of audio cables Detweer
the AUDtO INPUTjacks on the vane
the AUDIO OU] acks on the Set Top
Box
3
Connect a DVt cable betwee_
the DVI INPU] _CKontheTVandthe
DVI OUTjack on the Set TOEBox.
Not_Z For" _n t_xpl&rla[iQ [1 O[
_oInpollen[ VI_PO See 1o[iT
DTV Set-top boxs owners instruction
DTVSet-T0p Box
Notes
• The DVI INPUT jack can only be use with 480p, 720p, and 1080i picture signals.
Set the DTV decoder DVI OUTPUTjaek output setting to 480p, 720p or 108@.
Por detailed information, refer to the Set Top Box instruction manual.
• The DVI INPUT jack is not compatible with the picture signal of a personal computer.
• Use a DVI 25 pin cable (commercially available) in order to digitally connect the TV with a
DTV decoder.