Using The Sleep Timer; Setting The On/Off Timer; Locking Programs - Samsung LN40C530F1F User Manual

DST ( Off
/ On): Switches the DST (Daylight Saving Time)
function on or off.
This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone,
This function is only available when the Clock
Mode is set to Auto.
U
m
Using the Sleep Timer
MENU rlTI _ Setup _ Time _ Sleep Timer
ENTER 1_
Sleep Timer _ : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
To cancel the Sleep Timer, select
Off.
Setting the On/Off Timer
(_ MENU rlTI _ Setup _ Time _ Timer 1
ENTER I_
Ill Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Channel (when the Source is set to iV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
When there is only one photo file in the USB, the
Slide Show will not play.
If a folder name is too long, the folder cannot be
selected.
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each USB
have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mort~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The _/mark indicates the day is selected.
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating,
Locking Programs
(_ MENUiTrl --_ Setup --_Security --_ ENTERI_
On Time / Off Time: Set the hour, minute, am/pm
and activate / inactivate. (Toactivate the timer with the
setting you have chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to rv): Select Air or
Cable.
Security
The PIN input screen appears, Enter your 4 digit PIN number.
Ill V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children.
The user must enter a PIN (personal identification
number) before any of the V-Chip restrictions are set up
or changed.
NOTE
* V-Chip is not available in HDMI, Component
or PC mode.
* The default PIN number of a new TV set is
"0-0-0-0".
* Allow all: Press to unlock all TV ratings.
* Block all: Press to lock all TV ratings.
V-Chip Lock (Off / On): You can block rated TV
Programs.
English 19