Metering; Continuous Shot; Exposurecompensation - Samsung S1050 User Manual

• If you cannot obtain suitableexposure conditions, you can change the metering
method to take brighter pictures.
- [Multi] : Exposure will be calculated based on an
average of the available light in the image
area, However, the calculation will be
biased towards the centre of the image
area, This is suitable for general use,
- [Spot] : Only the rectangular area in the centre of
the LCD monitor will be metered for light.
This is suitable when the subject in the
centre is exposed correctly, regardless of the back lighting.
]PROGRAM mode]
e If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error, In this circumstance, it is better to use
exposurecompensation.
• You can select continuous shot, and AEB (Auto Exposure Bracketing).
- [Single] : Take one picture only.
- [Wise Shot] : 2 images are taken at a time.
One is taken in the FilMnFlash
mode and the other is taken in
the ASR mode.
- [Continuous] : Images will be taken
continuously until the shutter
button is released,The shooting
capacity depends on the memory,
- [AEB] : Take three pictures in a series in different exposures:
standard exposure (0.0EV), short exposure (-1/3EV) and
over exposure (+1/3EV).
- [Motion Capture] : This takes 30 shots per second, when the shutter is pressed
and held down. After completing the continuous shooting,
images are saved and the images play back on the Rear
LCD. The maximum number of shots is 30. Image size is
1024X768 and quality is fixed as normal,
[ PROGRAM mode }
(47_