Table of Contents
Advertisement
Troubleshooting
if the TV seems to have a problem, first try this list of possible problems and solutions.
if none of these troubleshooting
tips apply, call Samsung customer service at I=800=SAMSUNG.
Problem
Poor picture quality.
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
No picture or sound
No sound or sound is too low at
maximum volume.
Picture roils vertically.
The TV operates erratically.
The TV won't turn on.
Remote control malfunctions
Digital broadcasting screen
problem.
The image is too lightor too dark.
The image is too large or too
small
The visual qualities of digital
channels vary.
Screen is black and power
indicator
light blinks steadily.
Although the TV caption shows
HD. the visual quality is not
satisfactory.
A distorted picture appears in the
corner of the screen.
Try another channel.
Adjust the antenna.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
First, check the volume of units connected to your TV (digital broadcasting
receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume
accordingly.
Check all connections.
, Unplug the TV for 30 seconds, then try operating it again.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Make sure the remote has batteries.
Check that the "+" and "-" ends of the batteries are inserted correctly.
i Please check the digital signal strength and input antenna.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Adjust the Size settings.
The visual qualities of digital channels may vary depending on the original production
method (analog or digital).
- If the original production method is digital: High visual quality.
- If the original production method is analog: The digital program displayed on the
screen is originally an analog program which has been converted to digital.
On your computer; check the Power and Signal Cable.
The TV is using its power management system.
On your equipment check (STB, DVD, etc) • Power and Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The HD(High Definition) caption that appears when switching channels or when
pressing the INFO button on the remote control means the selected channel is a
digital channel. If the broadcasting station converts an analog signal into digital and
If Just Scan is selected in some external devices, a distorted picture appears in the
corner of the screen, picture may appear in the corner of the screen. This symptom is
A Strange sound is heard.
This !Scaused by m!nor systems £Peration and !s n£t a defect:............................................................
The "Resets all settings to the
This appears when you press and hold the EXIT button for a while. The product
default values" message appears, settings are reset to the factory defaults.
_" This Plasma panel uses a panel consisting of sub pixels (2,359,296 pixels (for 42 inch models)/3,147,264 pixels (for
50 inch models)) which require sophisticated technology to produce. However, there may be few bright or dark pixels
on the screen. These pixels will have no impact on the performance of the product.
Hide quick links:
Advertisement
Table of Contents
