To Select The Source; To Edit The Input Source Name - Samsung PN50A400C2DXZA User Manual

To Select the Source
Use to select TV or other external input sources such as DVD players or Set=top/Cable boxes connected to the TV.
Use to select the input source of your choice.
1 Press the MENU button to display the menu.
Press the A or _' button to select Input, then press the ENTER button.
Press the ENTER button to select Source List.
Press the A or • button to select signal source, then press the ENTER button.
Available signal sources: TV, AVl, Component1, Component2, PC,
HDMI1, HDMI2.
_-_ You can choose only those external devices that are connected to the TV.
[_ You can also press the SOURCE button on the remote control to view an external
signal source.
To Edit the Input Source Name
You can name the device connected to the input jacks to make your input source selection easier.
1 Press the MENU button to display the menu.
Press the A or T button to select Input, then press the ENTER button.
Press the A or _' button to select Edit Name, then press the ENTER button.
2
3
Press the A or T button to select AV1, Component1, Component2, PC,
HDMI1 or HDMI2 input jack, then press the ENTER button.
Press the A or T button to select VCR, DVD, Cable STB, Satellite STB, PVR
STB, AV Receiver, Game, Camcorder, PC, TV, IPTV, Blu-Ray, lid DVD or
Digital Media Adapter input source, then press the ENTER button.
Press the EXIT button to exit.
When a PC with a resolution of 640 x 480@60Hz is connected to the HDMI IN 2
port, you should set the HDMI2 mode to PC in the Edit Name menu.