Setting Up The Tv With Your Pc - Samsung LN19B650 User Manual

DisplayModes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
D=Sub and HDIVlI/DVIinput
Mode
Resolution (KHz) ......................... (Hz) (MHz) (H1V)
IBM 640 x 350 31.489 70.086 25.175 +/-
720 x 400 31.469 28.322 4+
MAC 640 x 480 35.000 30.240 4-
...................................................... 832 x624 ..................................................... 49..726 74.551 57.284 -/-
35.910 59.950 32.750 -/+ VESA CVT 720 x 576
1280 x 720
1280 x 720
640 x 480
640 x 480
800 x 800
800 x 800
800 x 800
1024 x 788
1024 x 788
1024 x 788
44.772
56.456
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
59.855
74.777
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
74.500
95.750
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
-/+
-/+
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
1360 x 768 , 47.712 , 60.015 , 85.500 +/+
VESA GTF 1280 x 720 52.500 70.000 89.040 -/+
When using an HDMI / DVI cable connection, you must use the HDMI (DVI) IN jack.
C)
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
Auto Adjustment
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
_-_ Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting Tools _ Auto Adjustment.
This function does not work in DVI-HDMI mode.
C) Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
PC Position
Adjust the PC's screen positioning if it does not fit the TV screen. Press the ,& or T button to adjusting the Vertical-Position. Press
the 41or _-button to adjust the Horizontal-Position.
image Reset
You can replace all image settings with the factory default values.