Using The Photo Lis - Samsung LN46A630 User Manual

Using the WISELINK Menu
1, Press the MENU button. Press the A or _r button to select "Application",
then press the ENTER _ button.
2, Press the A or • button to select "WISELINK", then press the ENTER C#
button.
>- The "WISELINK" menu is displayed.
[_ Press the W.LINK button on the remote control to display the "WISELINK"
menu.
(_ Press the SOURCE button on the remote control repeatedly to select
"USB", then press the ENTER _ button.
VOL SOURCE CH
3=
Press the Red button, then press the A or T button to select the corresponding USB Memory Device (i.e. if connected
through a hub). Press the ENTER _ button.
>- This function differs depending on the USB Memory Device connected to TV.
>- The selected USB device name appears at the bottom left of the screen.
4. Press the 4 or I_ button to select an icon (Photo, Music, Setup), then press the ENTER _ button.
>- To exit "WISELINK" mode, press the W.LINK button on the remote control.
Using the Photo List
This menu shows Photo files saved on an USB memory device.
Photo List
1=
2,
Press the W.LINK button on the remote control to display the "WISELINK"
menu.
Press the 4 or I_ button to select "Photo", then press the ENTER
button.
>- Photo files are displayed.
>- This menu only shows files whose file extension is jpg. Files of other
formats such as bmp or tiff will not be displayed.
>- Press the [_ (Play) / ENTER _ button to start the Slide Show.
>- To move to the previous / next group, press the I_ (REW) or
l_ (FF) button.
>- When moving to a photo, loading may take a few seconds. At this
point, the loading icon will appear at the screen.
>- It may take some time to load photo files as Thumbnail images.
>- Photos without EXIF information may not be displayed as thumbnail
images in the Photo List depending on the picture quality and
resolution.