Using The Tools Button; Memorizing The Channels - Samsung LN46A630 User Manual

Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The "Tools" menu changes
depending on which external input mode you are viewing.
1. Press the TOOLS button.
The "Tools" menu will appear.
2. Press the A or _' button to select a menu.
3. Press the A/_'/_/I_/ENTER _ buttons to display, change, or use the
selected items. For a more detailed description of each function, refer to the
corresponding page.
- Device List: see page 83
- Picture Mode: see page 18
- Sound Mode: see page 29
o Sleep Timer: see page 48
- Add to Favorite: see page 36
o Switch to Cable (or Switch toAir): see page 15
- PIP: see pages 27~28
* Auto adjustment: see page 44
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH v or CH ^ button to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1, Press the MENU button to display the menu.
Press the A or • button to select "Channel", then press the ENTER
button.
2=
Press the ENTER _ button to select "Antenna".
Press the A or T button to select "Air" or "Cable", then press the ENTER 13_
button.
Press the EXIT button to exit.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the A or T button to select "Switch to Cable (or Switch to Air)".
3. Press the ENTER C_ button to switch "Cable" (or "Air").