Setting Upthe Tv Withyourpc - Samsung LN19A451 User Manual

Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
>_ This function does not work in DVI-Digital mode.
:_ Preset: Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the A or T button to select "Picture", then press the ENTER _ button.
2=
Press the A or T button to select "Auto Adjustment", then press the ENTER C# button.
Press the EXIT button to exit.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the A or T button to select "Auto Adjustment", then press the
ENTER _ button.
Adustin the Screen ualit
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
>* Preset: Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the A or _r button to select "Picture", then press the ENTER C,-' button.
Press the A or T button to select "Screen", then press the ENTER C_ button.
2, Press the ENTER _ button to select "Image Lock".
3=
Press the A or T button to select "Coarse" or "Fine", then press the ENTER _ button.
Press the 4 or _ button to adjust the screen quality.
>- Vertical stripes may appear or the picture may be blurry.
Press the ENTER _ button.
Press the EXIT button to exit.