Adjustingthe Volume; Viewingthe Display; Viewingthe Menus - Samsung LN19A451 User Manual

Usina the (_)Button
The (_) button is used to select stations that broadcast a digital signal.
1. For example, for Channel 7-1, press 7, then (_), then 1.
> HD indicates the TV is receiving a Digital High Definition signal. SD indicates
the TV is receiving a Standard Definition signal.
> For quick channel change, press the number buttons, then press the ENTER
button.
_the PRE OH Button to select the Previous Channel
t, Press the PRE OH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the PRE OH button to quickly alternate between them.
Adjusting the Volume
Usinq the Volume Buttons
t, Press the VOL(_ or VOL(_ button to increase or decrease the volume.
Usinq the MUTE button
Ill oE
At any time, you can cut off the sound using the MUTE button.
t, Press MUTE button and the sound cuts off.
"_" is displayed on the screen.
2, To turn mute off, press the MUTE button again or simply press the
VOL_) or VOL(_ button.
MUTE li
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
1. Press the INFO button on the remote control.
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.
l/
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu's left side has icons:
Picture, Sound, Channel, Setup, Input.
2. Press the A or T button to select one of the icons.
Then press the ENTER _ button to access the icon's sub-menu.
3. Press the EXtT button to exit.
>_The on-screen menus disappear from the screen after about one minute.