What Is Ar ,Net; Connecting Anynet+ Devices - Samsung LN-T4665F Owner's Instructions Manual

What is Anynet+?
Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with the TV's remote.
Connecting Anynet + Devices
The Anynet+ system can be used onty with Samsung AV devices that have the Anynet+ feature.
To be sure your Samsung AV device has this feature, check if there is an Anynet+ mark on it.
To directly connect to TV
TV Anynet + Device 1 Anynet + Device2 Anynet + Device 3
Connect the [HDMt 1],
[HDMI 2] or [HDMI 3] jack on
the TV and the HDMI OUT
jack of the corresponding
Anynet+ device using the
HDMt cable.
To connect to Home Theater
TV
Oplicat CaNe
DMI 1 .3CaNe
HomeTheater
Anynet+ Device 1 Anynet+ Device 2
Anynet+ Device3
HDMI 1.3CaNe
Connect the [HDMt 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMt
cable.
Connect the HDMI iN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMt
cable.
>- Connect the OpticaI cable between [Digital Audio Out (Optical)] on your TV and Digital Audio input on the Home Theater.
>- Connect only one Home Theater.
:_ You can listen to 5.1 channel sound through the home theater's speakers. Otherwise, you can only listen to 2 channel stereo
sound in other cases. Make sure to connect the Digital Audio iN (OpticaI) of the home theater and the TV correctly to listen
to TV sound through the home theater. However, you cannot listen to sound from the BD recorder that is sent to the home
theater via the TV in 5.1 channet sound because the TV outputs only 2 channet stereo sound. Please see the manuaI for the
home theater.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
>'- Anynet+ supports up to 12 AV devices in total.